Fiber coupled laser diode system-iFLEX2000
The laser module is guaranteed for long lifetime and delivers exceptional power stability with low amplitude noise. All models feature an interlock and output diagnostics for laser current and temperature as standard. Features include a high dynamic range 5MHz TTL modulation option or a variable power control via analog modulation up to 5MHz. All lasers feature diffraction limited output beams with zero astigmatism, high spatial coherence and low dynamic pointing error.
The iFLEX2000 is compatible with a number of commercially available imaging software packages such as Olympus cellAR™, MetaMorph® and ^Manager and a number of add-on interfaces ensure a complete solution for all microscope systems.
The kinematic design of the laser to fiber coupler enables true <Plug & Play* benefits for singlemode and polarization-preservingfiberdesigns. Sub-micron repeatability and sub-microradian stability mean systems can be <factory set* and stable for multiple remove and insert operations. The laser and fiber systems are also optimized for unmatched laser modules thus providing true modularity for instrument design and ease of replacement.
Some of the product features include:
- Factory set and conform to specification (out of the box*
- Stable to optomechanical thermal effects and exhibits no hysteresis
- TEM00true Gaussian beam
- Wavelengths at 375, 405, 445, 473, 488, 515, 640, 660,670,780,830nm
- 50mW, OEM versions available
- Low noise
- High stability, high beam quality
- Software controllable
Technical Specifications
Lasers |
|
|
Units |
Wavelength 375 |
405 445 473 488 515 640 660 |
670 780 830 |
nm |
Output power 10 |
30, 50 20 5 15,30 10 20, 50 35 |
4 35 50 |
mW |
Operating performance |
|||
Polarization ratio |
< -20 |
|
dB |
Laser parameters |
|||
Center wavelength |
±5 |
|
nm |
Power stability (over 8 hours) |
<2 |
|
% |
Optical Noise (20Hz to 2MHz) rms* |
< 0.1 |
|
% |
Optical Noise (20Hz to 20kHz) pk to pk* |
<1 |
|
% |
Electrical |
|||
Power supply |
12V DC, 0.5A (laser) |
|
- |
|
5V DC, 3A max, 1 A running (TE Controller) |
- |
|
Max. base plate temperature |
+40 |
|
0C |
Max. heat dissipation |
12.5 |
|
W |
Connectorized output beam |
|||
Polarization maintaining fiber |
FCP (polarization keyed) |
|
|
|
FCP8, APC (polarization keyed and 8 degree polished) |
|
|
Fiber parameters |
|||
Fiber length |
1 to 3 |
|
m |
Fiber protective jacket |
Stainless steel, 5mm OD |
|
- |
Collimated output beam |
|||
Beam diameter |
0.7 |
|
mm |
M squared |
typ1.1 |
|
- |
Pointing stability |
< 1 |
|
卩rad/0C |
Beam divergence |
Diffraction Limited |
|
- |
Mechanical dimensions |
012x50 |
|
mm |
Beam position |
|
|
mm |
Beam angle |
|
|
mrad |
Environmental conditions |
|||
Storage temperature |
10to 50 |
|
0C |
Operating pressure |
Atmospheric |
|
- |
Operating temperature |
10to 40 |
|
0C |
Operating humidity |
Non-condensing |
|
- |
Modulation |
|||
Analog |
5MHz, <200ns rise time, input voltage level 0 - 5V |
- |